Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Effectiveness of double cutout on lateral buckling analysis of fiber reinforced composites

BULUT M.
Polymer Composites , cilt.45, sa.12, ss.10880-10887, 2024 (SCI-Expanded) identifier

Investigation of axial buckling behavior in composite laminates reinforced with S-glass fiber and epoxy featuring double cutouts

BULUT M., Erklig A.
Physica Scripta , cilt.99, sa.8, 2024 (SCI-Expanded) identifier

Effectiveness of multi-walled carbon nanotube on the improvement of tensile, flexural, and low-velocity impact properties of hybrid Kevlar/carbon fiber reinforced epoxy-based composites

Sulaiman B. H., Abdo A. R., Erkliğ A., Bozkurt Ö. Y., BULUT M.
Polymer Composites , cilt.45, sa.8, ss.7647-7660, 2024 (SCI-Expanded) identifier

A comparative study on adhesive properties of nanoparticle reinforced epoxy bonded single-strap repaired composites

Karaoǧlan H., Erkliǧ A., Doǧan N. F., BULUT M.
International Polymer Processing , cilt.39, sa.1, ss.70-79, 2024 (SCI-Expanded) identifier

SiO nanoparticle modified CFRP composites effecting on mechanical and vibration damping properties

Bozkurt Y. T., BULUT M., Erkliğ A., Özbek Ö.
Polymer Composites , cilt.45, sa.1, ss.169-180, 2024 (SCI-Expanded) identifier

Interlaminar shear strength and failure analysis of composite laminates with double and triple hybrid configurations

Özbek Ö., BULUT M., Erkliğ A., Bozkurt Ö. Y.
Engineering Structures , cilt.265, 2022 (SCI-Expanded) identifier

Effect of olive pomace particles content on mode I and mode II delamination fracture of S-glass fiber reinforced composites

BULUT M., Alsaadi M., Erkliğ A.
Polymer Composites , cilt.43, sa.2, ss.1157-1167, 2022 (SCI-Expanded) identifier

Effect of graphene nano-platelets on mechanical and impact characteristics of carbon/Kevlar reinforced epoxy hybrid nanocomposites

Alsaadi M., Younus B., Erklig A., BULUT M., Bozkurt O., Sulaiman B.
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , cilt.235, sa.23, ss.7139-7151, 2021 (SCI-Expanded) identifier

Fatigue Life and Stress Analysis of the Crankshaft of a Single Cylinder Diesel Engine under Variable Forces and Speeds

BULUT M., CİHAN Ö., Temizer I.
Materialpruefung/Materials Testing , cilt.63, sa.8, ss.770-777, 2021 (SCI-Expanded) identifier

An experimental investigation on dynamic and mechanical characterization of olive pomace-filled glass/epoxy composite laminates

Erkliğ A., BULUT M., Shihan A.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.42, sa.10, 2020 (SCI-Expanded) identifier

Low-Velocity Impact Tests on Basalt Fiber/Polypropylene Core Honeycomb Sandwich Composites

BULUT M.
Mechanics of Composite Materials , cilt.56, sa.1, ss.121-130, 2020 (SCI-Expanded) identifier

Mechanical and Dynamic Properties of Basalt Fiber-Reinforced Composites with Nanoclay Particles

BULUT M., Bozkurt Ö. Y., Erkliğ A., Yaykaşlı H., Özbek Ö.
Arabian Journal for Science and Engineering , cilt.45, sa.2, ss.1017-1033, 2020 (SCI-Expanded) identifier

A comparative study on the interlaminar shear strength of S-glass/epoxy composites containing borax, perlite and sewage sludge ash particles

BULUT M., Alsaadi M., Erkliǧ A.
Materials Research Express , cilt.6, sa.9, 2019 (SCI-Expanded) identifier

The effects of S-glass fiber hybridization on vibration-damping behavior of intraply woven carbon/aramid hybrid composites for different lay-up configurations

BULUT M., Alsaadi M., Erkliğ A., Alrawi H.
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , cilt.233, sa.9, ss.3220-3231, 2019 (SCI-Expanded) identifier

Axial and lateral buckling analysis of fiber reinforced S-glass/epoxy composites containing nano-clay particles

Bozkurt Ö. Y., BULUT M., Erkliğ A., Faydh W. A.
Composites Part B: Engineering , cilt.158, ss.82-91, 2019 (SCI-Expanded) identifier

Vibration-damping characterization of the basalt/epoxy composite laminates containing graphene nanopellets

BULUT M., Erklig A., Kanmaz P.
Science and Engineering of Composite Materials , cilt.26, sa.1, ss.147-153, 2019 (SCI-Expanded) Creative Commons License identifier

Nano-silica inclusion effects on mechanical and dynamic behavior of fiber reinforced carbon/Kevlar with epoxy resin hybrid composites

Alsaadi M., BULUT M., Erkliğ A., Jabbar A.
Composites Part B: Engineering , cilt.152, ss.169-179, 2018 (SCI-Expanded) identifier

Tensile and impact characterization of S-glass/epoxy composite laminates containing microscale borax, perlite, and sewage sludge ash particles

BULUT M., Alsaadi M., Erkliğ A.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.40, sa.4, 2018 (SCI-Expanded) Creative Commons License identifier

Toughening Effect of Microscale Particles on the Tensile and Vibration Properties of S-Glass-Fiber-Reinforced Epoxy Composites

Erkliğ A., BULUT M., Fayzulla B.
Mechanics of Composite Materials , cilt.54, sa.1, ss.119-128, 2018 (SCI-Expanded) identifier

The investigation of quasi-static indentation effect on laminated hybrid composite plates

BULUT M., Erkliğ A.
Mechanics of Materials , cilt.117, ss.225-234, 2018 (SCI-Expanded) identifier

A comparative study on the tensile and impact properties of Kevlar, carbon, and S-glass/epoxy composites reinforced with SiC particles

BULUT M., Alsaadi M., Erkliǧ A.
Materials Research Express , cilt.5, sa.2, 2018 (SCI-Expanded) identifier

On adhesive properties of perlite and sewage sludge ash with epoxy resin bonded single-strap repairs

BULUT M., Erkliǧ A., Doǧan N. F.
Materials Research Express , cilt.4, sa.8, 2017 (SCI-Expanded) identifier

Diğer Dergilerde Yayınlanan Makaleler

Stress and deformation analysis of a connecting rod by using ANSY

Bulut M., CİHAN Ö.
International Journal of Automotive Engineering and Technologies , cilt.9, sa.3, ss.154-159, 2020 (Hakemli Dergi) identifier

Stress and deformation analysis of a connecting rod by using ANSYS

BULUT M., CİHAN Ö.
International Journal of Automotive Engineering and Technologies , 2020 (Hakemli Dergi)

CFD Analysis of Exhaust Manifold for Different Designs

CİHAN Ö., BULUT M.
European Mechanical Science , cilt.3, sa.4, ss.147-152, 2019 (Hakemli Dergi) identifier

Torsional behavior of thin section glass fiber/epoxy composite filament wound tubes: Numerical modelling

BULUT M.
European Mechanical Science , cilt.3, sa.2, ss.52-55, 2019 (Hakemli Dergi) identifier

A numerical investigation on vibration analysis of fiber reinforced and truncated conical hollow shells with different fiber orientations

BULUT M.
Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.8, ss.259-269, 2018 (Hakemli Dergi) identifier

Vibration analysis of carbon and Kevlar fiber reinforced composites containing SiC particles

BULUT M.
SAKARYA UNIVERSITY JOURNAL OF SCIENCE , cilt.22, sa.5, ss.1423-1431, 2018 (Hakemli Dergi) identifier

Charpy Impact Response of Glass Fiber Reinforced Composite with Nano Graphene Enhanced Epoxy

ERKLİĞ A., DOĞAN N. F., BULUT M.
Periodicals of Engineering and Natural Sciences , cilt.5, sa.3, 2017 (Scopus) identifier

The Influence of Fiber Orientation Angle on Damping and Vibration Properties of Basalt Fiber Reinforced Composite Laminates

BOZKURT Ö. Y., ÖZBEK Ö., BULUT M.
Journal of Civil, Structural and Transportation Engineering (JCSTE) , cilt.2, ss.12-16, 2016 (Hakemli Dergi)

Yapıştırma ile Birleştirilmiş Cam Elyaf Takviyeli Kompozit Tabakaların Sönümleme ve Titreşim Davranışları

BOZKURT Ö. Y., ÖZBEK Ö., BULUT M.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.31, sa.ÖS1, ss.61-68, 2016 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Investigation of natural frequency using Ansys in a connecting rod

CİHAN Ö., BULUT M.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC), Ankara, Türkiye, 18 - 20 Ekim 2019, ss.455-457

Static stress and deformation analysis of a connecting rod by using Ansys

BULUT M., CİHAN Ö.
4. International Conference on Material Science and Technology in Kızılcahamam/ANKARA(IMSTEC), Ankara, Türkiye, 18 - 20 Ekim 2019, ss.446-450

KEVLAR VE KARBON FİBER İLE GÜÇLENDİRİLMİŞ HİBRİT KOMPOZİTLERİN TİTREŞİM ÖZELLİKLERİNİN DENEYSEL MODAL ANALİZ VE SONLU ELEMANLAR KULLANARAK BELİRLENMESİ

BULUT M.
III. ULUSLARARASI MESLEKİ VE TEKNİK BİLİMLER KONGRESİ, 21 - 22 Haziran 2018

Torsional behaviour of thin section glass fiber/epoxy composite filament wound tubes: Numerical modelling

BULUT M.
1st International Conference on Materials Engineering Science, 8 - 09 Ağustos 2018

Vibration Properties of Intraply Woven Carbon/Aramid Fiber Reinforced Composites with Nano Clay Particles

ERKLİĞ A., BULUT M., DOĞAN N. F.
ICAIE 2017- International Conference on Advances and Innovations in Engineering, 10 - 12 Mayıs 2017

Impact Performance of Intraply-Woven Carbon/Aramid Hybrid Composites with Nano-Clay Particles

BULUT M., ERKLİĞ A., BOZKURT Ö. Y.
ICAIE 2017- International Conference on Advances and Innovations in Engineering, 10 - 12 Mayıs 2017

İç İçe Dokunmuş Karbon/Aramid ve Epoksi Kompozitlerin DarbeDavranışına Hibritleşmenin Etkileri

BOZKURT Ö. Y., ERKLİĞ A., BULUT M.
2.ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU2017 ONUR KURULU, 6 - 08 Nisan 2017

Nano Silika Katkısının İç İçe Dokunmuş Karbon/Aramid Hibrit Fiber Takviyeli Kompozitlerin Düşük Hızlı Darbe Davranışına Etkileri

BOZKURT Ö. Y., ERKLİĞ A., BULUT M.
2.ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU2017 ONUR KURULU, 6 - 08 Nisan 2017

Charpy Impact Response of Glass Fiber Reinforced Composite with Nano Graphene Enhanced Epoxy Resin

ERKLİĞ A., DOĞAN N. F., BULUT M.
3rd INTERNATIONAL CONFERENCE ONENGINEERING AND NATURAL SCIENCES, 3 - 07 Mayıs 2017

On the Vibration Behavior of Intraply Woven Carbon/Kevlar Reinforced Composites with Nano Silica Particle

ERKLİĞ A., DOĞAN N. F., BULUT M.
3rd INTERNATIONAL CONFERENCE ONENGINEERING AND NATURAL SCIENCES, 3 - 07 Mayıs 2017

KEVLAR VE S CAMI İLE GÜÇLENDİRİLMİŞ HİBRİT KOMPOZİTLERİN TİTREŞİM ÖZELLİKLERİNİN BELİRLENMESİ

BULUT M., ERKLİĞ A., EYÜP Y.
XIX. ULUSAL MEKANİK KONGRESİ, Trabzon, Türkiye, 24 - 28 Ağustos 2015

TABAKALI KOMPOZİT PLAKALARIN YARI STATİK PENETRASYON YÜKLERİ ALTINDAKİ DAVRANIŞLARININ ARAŞTIRILMASI

BULUT M., MERVE Ş., ERKLİĞ A., YURTCU N., DAŞTAN T.
XIX. ULUSAL MEKANİK KONGRESİ, Trabzon, Türkiye, 24 - 28 Ağustos 2015

Influence of perlite particle inclusion with adhesively bonded single strap repairs on tensile properties of S-glass/epoxy composite laminates

ERKLİĞ A., BULUT M.
3rd International Conference on Advanced Technology Sciences (ICAT 2016), 1 - 03 Eylül 2016

The effect of micro particle reinforced adhesive on tensile strength of double lap joints

ERKLİĞ A., Al Ani Y. J., BULUT M., kütük M. A.
2nd International Conference on Engineering and Natural Sciences (ICENS 2016), 24 - 28 Mayıs 2016

The Influence of Borax Filler Addition on Damping and Vibration Response of S glass epoxy Composite Laminates

ERKLİĞ A., BULUT M.
International congress on Civil, Structural, and Environmental Engineering, 30 - 31 Mart 2016 identifier

Effect of Fibre Orientations on Damping and Vibration Characteristics of Basalt Epoxy Composite Laminates

BOZKURT Ö. Y., BULUT M., ÖZBEK Ö.
International congress on Civil, Structural, and Environmental Engineering, 30 - 31 Mart 2016 identifier

Tek tesirli yapıştırma bağlantılarında epoksi yapıştırıcı içerisindeki mikro boyuttaki perlitin hasar yüküne etkileri

ERKLİĞ A., BULUT M.
International Conference on Welding Technologies and Exhibition (ICWET’xx16), 11 - 13 Mayıs 2016

Damping and Vibration Behavior of Adhesively Bonded Composite Laminates

BOZKURT Ö. Y., ÖZBEK Ö., BULUT M.
International Conference on Welding Technologies and Exhibition (ICWET 16), 11 - 13 Mayıs 2016

Free Vibration of Composite Plates With Cut outs

BULUT M., ERKLİĞ A., KARACALI T., ÇAVUŞOĞLU B., ORAL E. A., ÖZBEK İ. Y.
2nd International Conference on Computation for Science and Technology, 16 - 18 Eylül 2012

Metrikler

Yayın

50

Atıf (Scopus)

402

H-İndeks (Scopus)

11

Proje

2

Açık Erişim

2