Asst. Prof. ERKAN KAÇAR

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Surface analysis of (Ti,Mg)N coated bone fixation devices following the rabbit femur surgery

Sabouni K., Öztürk Y., KAÇAR E., Kose G. T., Kök F. N., Kazmanlı M. K., et al.

Bio-Medical Materials and Engineering , vol.34, no.5, pp.459-472, 2023 (SCI-Expanded)

Effect of MWCNTs addition on structural, mechanical, and bio properties of electrophoretically deposited HA-Ta2O5 coating on NiTi

Horandghadim N., Khalil-Allafi J., Ghazanfar-Ahari Y., KAÇAR E.

Surface and Coatings Technology , vol.450, 2022 (SCI-Expanded)

Tic production on steel with cathodic arc based -diffusion process

KAÇAR E., Ürgen M. K.

Surface Engineering , vol.38, no.2, pp.150-157, 2022 (SCI-Expanded)

Assessment of bone healing using (Ti,Mg)N thin film coated plates and screws: Rabbit femur model

Sabouni K., Öztürk Y., KAÇAR E., Mutlu H. S., SOLAKOĞLU S., Kose G. T., et al.

Journal of Biomedical Materials Research - Part B Applied Biomaterials , vol.109, no.2, pp.227-237, 2021 (SCI-Expanded)

On the Erosive Wear of Carbon Fiber-Reinforced Epoxy Composite in the Olive Oil Extraction Process

Sakka M., Bahri A., KAÇAR E., Elleuch K., Ürgen M. K.

Journal of Tribology , vol.142, no.7, 2020 (SCI-Expanded)

Biomechanical compatibility and electrochemical stability of HA/Ta2O5 nanocomposite coating produced by electrophoretic deposition on superelastic NiTi alloy

Horandghadim N., Khalil-Allafi J., KAÇAR E., Ürgen M. K.

Journal of Alloys and Compounds , vol.799, pp.193-204, 2019 (SCI-Expanded)

Aluminising of steel with a cathodic arc plasma based method

Çelikel T., KAÇAR E., Ürgen M. K.

Transactions of the Institute of Metal Finishing , vol.97, no.3, pp.140-145, 2019 (SCI-Expanded)

Wear protection potential of TiN coatings for 304 stainless steels used in rotating parts during olive oil extraction

Bahri A., KAÇAR E., Akkaya S., Elleuch K., Ürgen M. K.

Surface and Coatings Technology , vol.304, pp.560-566, 2016 (SCI-Expanded)

Articles Published in Other Journals

Surface Alloying Of Titanium With Nickel By Using Cathodic Arc Based Plasma Treatment

SEZGİN N., KAÇAR E., KAZMANLI M. K., ÜRGEN M. K.

SAKARYA UNIVERSITY JOURNAL OF SCIENCE , vol.22, no.5, pp.1181-1189, 2018 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Effect of Substrate Bias on Mechanical Properties of Magnetron Sputtered AlTiN-B₄C Films

KISACIK Ö., YILDIRIM C., KAÇAR E., TURAN S., SÜRDEM S.

21st International Metallurgy and Materials Congress, İstanbul, Turkey, 6 October - 08 December 2022

Determination of Corrosion Initiation Sites on TiN Coated Steels and Their Propagation with Ferroxyl Test and AC Impedance Measurements

ER D., KAÇAR E., ÜRGEN M. K.

Electrochemistry Conference -2019, 30 September - 02 October 2019

Corrosion and corrosion protection properties of a binary Al-Fe alloys produced with a cathodic arc PVD based method

ÜRGEN M. K., KAÇAR E., EROĞLU B.

Past, present and future of Corrosion and light metal surface scince, 24 May 2019

Investigation of the Formation of Ni-Ti Intermetallic Layers Produced by Cathodic Arc Electron-metal Ion Treatment

SEZGİN N., KAÇAR E., KAZMANLI M. K., ÜRGEN M. K.

45th ICMCTF 2018, 23 - 27 April 2018

Structural and Tribological Properties of Mixed Iron-Titanium Borides Produced with Cathodic Arc Assisted Alloying and Electrochemical Boriding

KAÇAR E., YELKARASI Ç., TİMUR S. İ., ÜRGEN M. K.

45th ICMCTF 2018, 23 - 27 April 2018

Microstructure, hardness and morphological investigation of iron aluminides produced by a CA-PVD based diffusion process

KAÇAR E., İPEKSAÇ T., ÜRGEN M. K.

8. International Advance Technologies Symposium, Elazığ, Turkey, 19 - 22 October 2017

A powerful tool: Changing the mode and magnitude of bias voltage in cathodic arc systems for tuning the properties of hard coatings and surface alloying

ÜRGEN M. K., Golnaz T. P. A., KAÇAR E., Akkaya S.

HyMap 2017, The 4th International Symposium on Hybrid Materials and Processing, 5 - 08 November 2017

Utilization of Cathodic arc Aluminum Plasma for the Production of Iron rich Aluminides on Carbon steels

KAÇAR E., İpeksac T., YELKARASI Ç., ÜRGEN M. K.

HyMap 2017, The 4th International Symposium on Hybrid Materials and Processing, 5 - 08 November 2017

PRODUCTION OF HARD TITANIUM CARBIDE THICK FILMS ON STEEL SUBSTRATE VIA CAPVD BASED NOVEL APPROACH

KAÇAR E., YELKARASI Ç., ÜRGEN M. K.

INTERNATIONAL MATERIALS TECHNOLOGIES AND METALLURGY CONFERENCE 2017, 26 - 27 October 2017

The Effect of Using Pulse Bias Voltage on the Stress Level and Hardness of TiN Coatings Produced via Cathodic Arc Method

TAGHAVI POURIAN AZAR G., KAÇAR E., ÜRGEN M. K.

STRESS'16 Stress evolution in thin film and coatings: from fundamental understanding to control, CHICAGO, United States Of America, 2 - 05 October 2016

Aluminizing of steel surfaces at high temperatures by using cathodic arc PVD

İpeksaç T., KAÇAR E., ÜRGEN M. K.

IMMC'16 Istanbul-TR, İstanbul, Turkey, 29 September - 01 October 2016

Stress evolution in thin film and coatings from fundamental understanding to control The Effect of Using Pulse Bias Voltage on the Stress Level and Hardness of TiN Coatings Produced via Cathodic Arc Method

Taghavi Pourian Azar G., KAÇAR E., ÜRGEN M. K.

Stress'16 Chicago -ABD, 2 - 10 October 2016

Calvanic corrosion investigations of TiN steel and TiN stainless steel couples

AVCI B., KAÇAR E., ÜRGEN M. K.

EUROCORR 2016, Montpellier, France, 11 - 15 September 2016

Galvanic corrosion investigations of TiN steel and TiN stainless steel couples