Yayınlar & Eserler

Yayın Ağı
Makaleler 34
Tümü (34)
SCI-E, SSCI, AHCI (16)
SCI-E, SSCI, AHCI, ESCI (16)
Scopus (18)
TRDizin (8)
Diğer Yayınlar (9)

1. Microstructural, Corrosion and Mechanical Properties of Ni–Al–Cr/SiC Coatings on Inconel 600 Deposited by Arc Welding

Çetin T.
CRYSTALS , cilt.16, sa.1, ss.1-10, 2026 (SCI-Expanded, Scopus)

2. Cytotoxicity and antibacterial activity of polyhedral oligomeric silsesquioxane modified Ti3C2Tx MXene films

Akınay Y., Karatas E., Ruzgar D., Akbari A., Baskın D., ÇETİN T., et al.
Scientific Reports , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus) identifier identifier

3. Magnetically retrievable 2-(2-Pyridyl)benzimidazole-Cu(I) on SBA-15@Fe3O4 for sodium Azide-Induced amination of Aryl halides

Abbasi Z., Mansoori Y., Fekri S., Akınay Y., ÇETİN T.
Scientific Reports , cilt.15, sa.1, 2025 (SCI-Expanded, Scopus) identifier identifier

4. The Effects of Coating Materials on Machinability Characteristics of AA7075-T6 Alloys under Different Turning Conditions

Fidan U., ÇETİN T., GÜNDOĞMUŞ H.
Journal of Materials and Mechatronics:A (Online) , cilt.6, 2025 (TRDizin)

5. Forecasting Natural Gas Consumption in Hakkari Province Using Artificial Neural Network

Gökdemir M. E., Çetin T., Çiçek B.
IJANSER , cilt.9, sa.12, ss.599-605, 2025 (Hakemli Dergi)

6. A Review: Literature Summary on the Relationship Between Cutting Parameters and Machinability in Turning Operations

Kaplan Y., Binali R., Çetin T., Gökdemir M. E., Yaghoubi S., Topuz M.
Doğu Fen Bilimleri Dergisi , sa.Advanced Online Publication, ss.193-212, 2025 (Hakemli Dergi)

7. Cu(II)-Aminotetrazole Complex Anchored on SBA-15: A High-Performance Catalyst for the Synthesis of 1,4-Disubstituted-1,2,3-Triazoles

Taghavi N., Mansoori Y., Fekri S., Akınay Y., ÇETİN T.
Catalysis Letters , cilt.155, sa.10, 2025 (SCI-Expanded, Scopus) identifier

8. EXPERIMENTAL AND STATISTICAL EVALUATION OF THE MACHINABILITY OF PURE ZINC BY TURNING METHOD

Karabulut S., BİNALİ R., GÖKDEMİR M. E., ÇETİN T., YAVUZER B.
NWSA Academic Journals , cilt.20, 2025 (Hakemli Dergi) Creative Commons License

9. An Investigation of Machinability of Hot Work Tool Steel Toolox 44 with Cutting Tools with Different Nose Radius Using Machine Learning

Kaya K., ÇETİN T., BİNALİ R., GÜNDOĞMUŞ H.
İmalat Teknolojileri ve Uygulamaları , cilt.6, 2025 (TRDizin)

10. Finish turning of toolox 33 to improve machining parameters with different nose radius tools

Kaya K., ÇETİN T., BİNALİ R., GÜNDOĞMUŞ H.
European Mechanical Science , cilt.9, sa.3, ss.234-245, 2025 (TRDizin)

11. Review: recent developments in 2D MXene-filled bioinspired composites for biomedical applications

Akınay Y., Topuz M., GÜNEŞ Ü., GÖKDEMİR M. E., ÇETİN T.
Journal of Materials Science , cilt.60, sa.26, ss.10670-10699, 2025 (SCI-Expanded, Scopus) identifier

12. Machining of AISI 52100 Steel: Statistical Insights into Dry Environment with Variable Tool Nose Radius

Karabulut S., BİNALİ R., KORKMAZ M. E., ÇETİN T.
Doğu Fen Bilimleri Dergisi , cilt.8, 2025 (Hakemli Dergi)

13. Ti3C2Tx MXene/halloysite nanotube functionalized films for antibacterial applications

Topuz M., Karatas E., Ruzgar D., Akınay Y., ÇETİN T.
Journal of Biomaterials Science, Polymer Edition , cilt.36, sa.18, ss.3185-3199, 2025 (SCI-Expanded, Scopus) identifier identifier

14. Ti2NTx MXene materials derived from Ti2AlN MAX phases: Their characterization and electrocatalytic activity toward hydrazine electrooxidation

Ulaş B., ÇETİN T., Topuz M., Akınay Y.
International Journal of Hydrogen Energy , cilt.82, ss.892-900, 2024 (SCI-Expanded, Scopus) identifier

15. Ti3C2Tx MXene-functionalized Hydroxyapatite/Halloysite nanotube filled poly– (lactic acid) coatings on magnesium: In vitro and antibacterial applications

Topuz M., Akınay Y., Karatas E., ÇETİN T.
Journal of Magnesium and Alloys , cilt.12, sa.9, ss.3758-3771, 2024 (SCI-Expanded, Scopus) identifier

16. An Efficient Supported Cu(I) Catalyst for the Amination of Aryl Halides with Sodium Azide

Fekri S., Mansoori Y., Akınay Y., ÇETİN T., John M.
ChemNanoMat , cilt.10, sa.6, 2024 (SCI-Expanded, Scopus) identifier

17. Novel Ti3C2X2 MXene supported BaMnO3 nanoparticles as hydrazine electrooxidation catalysts

Ulaş B., ÇETİN T., KAYA Ş., Akınay Y., DEMİR KIVRAK H.
International Journal of Hydrogen Energy , cilt.58, ss.726-736, 2024 (SCI-Expanded, Scopus) identifier

18. Novel g-C3N4 nanorods/Cu3BiS3 nanocomposites: Outstanding photocatalysts with p-n heterojunction for impressively detoxification of water under visible light

Hemmati-Eslamlu P., Habibi-Yangjeh A., Akınay Y., ÇETİN T.
Journal of Photochemistry and Photobiology A: Chemistry , cilt.443, 2023 (SCI-Expanded, Scopus) identifier

19. Synthesis and characterization of Pd doped MXene for hydrogen production from the hydrolysis of methylamine borane: Effect of cryogenic treatment

Karataş ., ÇETİN T., Akınay Y., Gülcan M.
Journal of the Energy Institute , cilt.109, 2023 (SCI-Expanded, Scopus) identifier

20. Recent progress of electromagnetic wave absorbers: A systematic review and bibliometric approach

Akınay Y., GÜNEŞ Ü., Çolak B., ÇETİN T.
ChemPhysMater , cilt.2, sa.3, ss.197-206, 2023 (Scopus) identifier

21. Rh (0) nanoparticles impregnated on two-dimensional transition metal carbides, MXene, as an effective nanocatalyst for ammonia-borane hydrolysis

Karataş ., ÇETİN T., Akkuş İ. N., Akınay Y., Gülcan M.
International Journal of Energy Research , cilt.46, sa.8, ss.11411-11423, 2022 (SCI-Expanded, Scopus) identifier

22. Experimental Investigation of the Mechanical and Microstructure Properties of S49 Rail Steel

RIDVANOGULLARI A., ÇETİN T., AKKAŞ M.
European Journal of Technique , cilt.11, sa.1, ss.43-46, 2021 (TRDizin) identifier

23. EFFECT OF WC REINFORCED ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CUALMN ALLOYS PRODUCED BY HOT PRESSING METHOD

ÇETİN T., AKKAŞ M.
European Journal of Technique , cilt.10, sa.1, ss.173-183, 2020 (TRDizin) Creative Commons License identifier

24. Production and Characterization of Natural Sourced Hydroxyapatite Added Polystyrene Tissue Scaffolds by Electrospinning

Sakarya Buluş G., Buluş E., AKKAŞ M., ÇETİN T., Yaman E., Tuğçe A.
Journal of Materials and Electronic Devices , cilt.6, sa.1, ss.11-17, 2020 (Hakemli Dergi)

25. Use of Nanofiber Membranes Produced by Electrospinning Technique in Textile Industry Applications

Sakarya Buluş G., Buluş E., AKKAŞ M., ÇETİN T.
Journal of Materials and Electronic Devices , cilt.6, sa.1, ss.1-6, 2020 (Hakemli Dergi)

26. Plasma Sprayed Alumina-Titania Based Coatings on Magnesium Substrates

AKKAŞ M., ÇETİN T., Buluş E., Sakarya Buluş G.
Journal of Materials and Electronic Devices , cilt.6, sa.1, ss.6-10, 2020 (Hakemli Dergi)

27. Investigation of the effect of gas pressure on powder characterization of AM60 magnesium alloy powder produced by gas atomization method Gaz atomizasyonu yöntemi ile üretilen AM60 magnezyum alaşım tozunun toz karakterizasyonu üzerine gaz basıncının etkisinin araştırılması

Çetin T., Akkaş M., BOZ M.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.35, sa.2, ss.967-977, 2020 (SCI-Expanded, Scopus, TRDizin) identifier identifier

28. Gaz Atomizasyon Yöntemi ile AZ31 Mg Tozu Üretiminde Gaz Basıncının Etkisinin Araştırılması

AKKAŞ M., EM AKRA K. M., ÇETİN T., BOZ M.
Gümüşhane Üniversitesi Fen Bilimleri Dergisi , cilt.9, sa.2, ss.215-221, 2019 (TRDizin) identifier

29. INVESTIGATION OF GAS PRESSURE EFFECT ON POWDER CHARACTERIZATION OF AZ31 ALLOY PRODUCED BY GAS ATOMIZATION METHOD

Akkaş M., Em Kara K. M., Cetin T., BOZ M.
Sigma Journal of Engineering and Natural Sciences , cilt.37, sa.2, ss.373-380, 2019 (Scopus) identifier

30. Investigation of Gas Pressure Effect on Powder Characterization of Al-12Si Alloy Produced by Gas Atomization Method

EM AKRA K. M., ÇETİN T., OCAK A. O., AKKAŞ M., BOZ M.
International Science and Technology Journal , sa.16, ss.1-14, 2019 (Hakemli Dergi)

31. GAZ ATOMİZASYON YÖNTEMİ İLE AM60 MAGNEZYUM ALAŞIM TOZU ÜRETİMİ VE KARAKTERİZASYONU

AKKAŞ M., ÇETİN T., BOZ M.
Süleyman Demirel Üniversitesi Uluslarası Teknolojik Bilimler Dergisi , cilt.10, sa.3, ss.1-9, 2018 (Hakemli Dergi)

32. Gaz atomizasyonu yöntemi ile Al12Si tozu üretimi ve karakterizasyonu

AKKAŞ M., ÇETİN T., BOZ M.
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , cilt.9, sa.2, ss.795-804, 2018 (TRDizin)

33. Effect of the sintering temperature on the coating of duplex stainless steel with Ni3Al

Çay V. V., Kati N., Ozan S., Çetin T.
Materialpruefung/Materials Testing , cilt.60, sa.6, ss.633-638, 2018 (SCI-Expanded, Scopus) identifier

34. The effect of gas pressure on powder size and morphology in the production of AZ91 powder by gas atomization method

Akkaş M., Çetin T., BOZ M.
Archives of Metallurgy and Materials , cilt.63, sa.4, ss.1587-1594, 2018 (SCI-Expanded, Scopus) identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 12

1. Effect of Cutting Speed on Machinability Output Parameters in 1040 Steel Machining

Kaplan Y., BİNALİ R., Ayrancı E., ÇETİN T., ÇİÇEK B.
6 th International Conference on Contemporary Academic Research, Konya, Türkiye, 25 Kasım 2025, (Tam Metin Bildiri)

2. Effect of Cutting Parameters on Temperature in Machining of 5115 Steel

Gökdemir M. E., Çetin T., Topuz M.
7th International Conference on Engineering and Applied Natural Sciences, Konya, Türkiye, 26 Ekim 2025, ss.508-513, (Tam Metin Bildiri) Creative Commons License

3. Turning high strenght Al7075 alloy for achieving optimal cutting force

BİNALİ R., KUNTOĞLU M., ÇETİN T.
3rd Global Summit on Advanced Materials For Energy Applications (GAMSE25), Aveiro University, Portekiz, 30 Nisan - 02 Mayıs 2025, (Tam Metin Bildiri)

4. Machining induced changes in cutting forces during turning AISI 1015 carbon steel

BİNALİ R., KUNTOĞLU M., ÇETİN T.
3rd Global Summit on Advanced Materials For Energy Applications (GAMSE25), Aveiro University, Portekiz, 30 Nisan - 02 Mayıs 2025, (Tam Metin Bildiri)

5. Investigation of Machinability of 6082 Aluminum Alloy by Turning Method

ÇETİN T.
4th International Conference on Contemporary Academic Research ICCAR 2025, 23 Şubat 2025, (Tam Metin Bildiri)

6. Investigation of the Machinability of Titanium Alloy Materials by Turning Method

ÇETİN T.
2nd International Conference on Modern and Advanced Research ICMAR 2025, 20 Ocak 2025, (Tam Metin Bildiri)

7. Hydrogen Evolution Reaction Behavior of Pd-Doped MXene Catalysts

ÇETİN T.
SMART MATERIALS 2023, Roma, İtalya, 13 - 14 Nisan 2023, (Özet Bildiri)

8. Porous Cryo-Dried MXene Supported Pd (0) Nanoparticles for The Methylamine-Borane Hidrolysis as An Effective and Stable Catalyst

KARATAŞ Y., AKINAY Y., GÜLCAN M., ÇETİN T.
NANOSCIENCE & NANOTECHNOLOGY CONFERENCE, Ankara, Türkiye, 5 - 08 Eylül 2022, (Özet Bildiri)

9. Synthesis of BaO Modifed MXene catalyst for the hydrogen evolution reaction

ÇETİN T., AKINAY Y.
GRAPHENE SUMMIT 2021, Oregon, Amerika Birleşik Devletleri, 22 - 23 Temmuz 2021, (Özet Bildiri)

10. Effect of Cr Addition on Microstructure and Mechanical Properties of Cu Al Mn Alloys Produced by Hot Pressing Method

ÇETİN T., GÖK M. G., AKKAŞ M.
International Materials Technologies and Metallurgy Conference 2019 – MTM 2019, İstanbul, Türkiye, 31 Ekim - 02 Kasım 2019, (Özet Bildiri)

11. Effect of Ni Addition on Microstructure and Mechanical Properties of Cu-Al-Mn Alloys Produced by Hot Pressing Method

ÇETİN T., AKKAŞ M., GÖK M. G.
International Materials Technologies and Metallurgy Conference 2019 – MTM 2019, İstanbul, Türkiye, 31 Ekim - 01 Kasım 2019, (Tam Metin Bildiri)

12. Dublex Paslanmaz Çeliğin Farklı Basınçlarda Üretilen Ni3Al İle Kaplanması 4 Uluslararası Kaynak Teknolojileri Konferansı ve Sergisi

KATI N., ÇETİN T., OZAN S., ÇALIGÜLÜ U., ÇAY V. V.
2016, 11 - 13 Mayıs 2016, ss.255-264, (Tam Metin Bildiri)
Metrikler

Yayın

46

Yayın (WoS)

16

Yayın (Scopus)

18

Atıf (Scopus)

412

H-İndeks (Scopus)

9

Atıf (Scholar)

490

H-İndeks (Scholar)

10

Atıf (TrDizin)

10

H-İndeks (TrDizin)

2

Atıf (Sobiad)

20

H-İndeks (Sobiad)

3

Atıf (Diğer Toplam)

21

Toplam Atıf Sayısı

463

Proje

8

Tez Danışmanlığı

2

Açık Erişim

2